On the stock Wellcom 2.1 firmware if I make a call and put the phone up to my ear the screen goes off. During the call I cannot get the screen to turn back on. All I can do is press the red key to end the call. After that the screen will turn on but the phone is locked and the touchscreen is non-responsive. I have to do a battery pull to get the phone back. Obviously, this is a very annoying problem. I don’t know if it is the firmware or my phone. If my phone I can take to Wellcom for service. If anyone has the stock Wellcom firmware loaded please reply if you have the same problem or not when making a call?
Also, if you had the problem and fixed it what did you do to fix it?
่http://dl.dropbox.com/u/6289358/firmware.nb0 firmeware wellcom
@eoror24 – What firmware is this? I already have the normal Wellcom 2.1 firmware.
You don’t understand. I have the stock firmware already loaded and I know how to flash the phone. I have a problem with the proximity sensor. When I make a call the screen goes off and I cannot get it to go back on.
your problem caused [flash incomplete] you should flash [official fw] again.
But this problem isn’t lost. you can flash official rom and take your phone to [WellcoM Service]
at [NewTel Corporation Co., Ltd.] Located [246/1-8 | S Building | Room S 1-8 | Project Royal City Avenue | Rama 9 Road | Huaykwang | Bangkok 10310 | Tel.02-641-5000]
Good luck.
คุณตัวเลขมาช่วยพอดีหายไปไหนมาคับ
ใกล้สอบครับ สอบวันจันทร์
HELP!!!
I dowenloaded firmware from sd card. It said firmware download succeeded but now my phone won’t turn on at all. Can someone help me please!!
ไม่กล้าตอบและเดี๋ยวหาว่าไม่รู้อีก หึหึ
Hi Jackboy This firmware wellcom 2.1 this firrmware install via memory card
How to:
1. Copy firmware.nb0 to sdcard
2. Power off you device
3. Push revovery mode Camera + volumn up + power on
4. Select Update firmware from sdcard
wait ……….
5. reboot
6. wipe data / wipe cache
7. reboot system now
ท่านนี้ ท่าน ดุ ครับ ท่านไปทะเลาะ ในบอร์ด ฝรั่่งมา
เห็นช่วงนี้ตั้งหลายกระทู้ แต่ไม่กล้าจะตอบกลัวไม่ถูกใจ
I did firmware.nb0 on sdcard as mentioned above. It said “download succeeded” and then said nothing else. It didn’t go back to the recovery screen. After waiting long time I pulled battery and now power button doesn’t work. Does Wellcom service have tools to flashqphone like this.
คะแนนสูงให้ตายยังไง แต่ออกมาขายไทยแล้วไม่รองรับภาษาไทย ก็ขายไม่ออกอยู่ดี – -“SK0-003 // 642-647 // 310-202 // 646-578 // PK0-003 // 156-215.70 // JK0-701 // 1z0-526 // ST0-29B // 6002-1 // 646-985 // 000-977 // HP2-Z07 // 1D0-541 (http://www.pass4sure.com/SK0-003.html)