Page 3 | DroidSans

ขอขอบ คุณ ครับ เพื่อนๆๆๆๆ งม อยู่ 3 วัน ตอนนี้ ทำได้ แล้วววว
ขอบคุณมากๆๆๆๆ
ผมลง ใหม่ หมด หลาย รอบ แล้ว แต่ ไม่ เคย ได้

วิธี คือ

ลงใหม่ หมด
และ
ลองวิธีของคุณ java2010
ลอง กด *#272*IMEI# เลือก THL แล้วแตะ Install เครื่องจะทำการ factory data reset ให้ด้วยเลยนะครับ ข้อมูลหลายหมดนะครับ

ขอบคุณ มากๆ ครับ ที่ ช่วย กัน มา ตลอดดดดดดด ครับ

ADB_TRACE – Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL – The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS – When used with the logcat option, only these de
bug tags are printed.

C:\sdk\android-sdk\tools>adb push recovery-RA-pecan-2.2.1-GNM-drap.img /sdcard/
error: device not found

C:\sdk\android-sdk\tools>md5sum -c md5sum
‘md5sum’ is not recognized as an internal or external command,
operable program or batch file.

C:\sdk\android-sdk\tools>adb root
error: device not found

C:\sdk\android-sdk\tools>adb devices
List of devices attached

C:\sdk\android-sdk\tools>adb push recovery-RA-pecan-2.2.1-GNM-drap.img /sdcard/
cannot stat ‘recovery-RA-pecan-2.2.1-GNM-drap.img’: No such file or directory

C:\sdk\android-sdk\tools>adb push recovery-RA-pecan-2.2.1-GNM-drap.img/sdcard/
Android Debug Bridge version 1.0.29

-d – directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e – directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s – directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p – simple product name like ‘sooner’, or
a relative/absolute path to a product
out directory like ‘out/target/product/sooner’.

If -p is not specified, the ANDROID_PRODUCT_OUT

environment variable is used, which must
be an absolute path.
devices – list all connected devices
connect [:] – connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [[:]] – disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments

will disconnect from all connected TCP/IP devic
es.

device commands:
adb push – copy file/dir to device
adb pull [] – copy file/dir from device
adb sync [ ] – copy host->device only if changed
(-l means list but don’t copy)
(see ‘adb help all’)
adb shell – run remote shell interactively
adb shell – run remote shell command
adb emu – run emulator console command
adb logcat [ ] – View device log
adb forward – forward socket connections
forward specs are one of:
tcp:
localabstract:
localreserved:
localfilesystem:
dev:
jdwp: (remote only)
adb jdwp – list PIDs of processes hosting a JDWP transport

adb install [-l] [-r] [-s] – push this package file to the device and i
nstall it
(‘-l’ means forward-lock the app)
(‘-r’ means reinstall the app, keeping its data
)
(‘-s’ means install on SD card instead of inter
nal storage)
adb uninstall [-k] – remove this app package from the device
(‘-k’ means keep the data and cache directories
)
adb bugreport – return all information from the device
that should be included in a bug report.

adb backup [-f ] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] []
– write an archive of the device’s data to
.
If no -f option is supplied then the data is wr
itten
to “backup.ab” in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device’s
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
( is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)

adb restore – restore device contents from the backup
archive

adb help – show this help message
adb version – show version num

scripting:
adb wait-for-device – block until device is online
adb start-server – ensure that there is a server running
adb kill-server – kill the server if it is running
adb get-state – prints: offline | bootloader | device
adb get-serialno – prints:
adb status-window – continuously print device status for a specifie
d device
adb remount – remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] – reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader – reboots the device into the bootloader
adb root – restarts the adbd daemon with root permissions
adb usb – restarts the adbd daemon listening on USB
adb tcpip – restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp [parameters] – Run PPP over USB.
Note: you should not automatically start a PPP connection.
refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] – Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ ]
can be interpreted in several ways:

– If is not specified, both /system and /data partitions will be u
pdated.

– If it is “system” or “data”, only the corresponding partition
is updated.

environmental variables:
ADB_TRACE – Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL – The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS – When used with the logcat option, only these de
bug tags are printed.

C:\sdk\android-sdk\tools>adb root
adbd cannot run as root in production builds

C:\sdk\android-sdk\tools>adb devices
List of devices attached
80A356525042001517 device

C:\sdk\android-sdk\tools>adb shell
$ su
su
Permission denied
$ su
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
Permission denied
$ mount: Operation not permitted
$ mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
mount: Operation not permitted
$ su
su
Permission denied
$ su
su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
Permission denied
$ $ exit
exit

C:\sdk\android-sdk\tools>adb devices
List of devices attached
80A356525042001517 device

C:\sdk\android-sdk\tools>adb shell
$ su
su
Permission denied
$ su
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
Permission denied
$ mount: Operation not permitted
$ su
su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image
# sync# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image

# sync
Permission denied
$ $ $ $ $ su
su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image
# sync# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image

# sync
Permission denied
$ $ $ $ $
C:\sdk\android-sdk\tools>adb shell
$ su
su
Permission denied
$ su
su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image
# sync# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image
Permission denied
$ $ $ $ exit
# syncexit
$
C:\sdk\android-sdk\tools>adb devices
List of devices attached

C:\sdk\android-sdk\tools>adb devices
List of devices attached

C:\sdk\android-sdk\tools>adb devices
List of devices attached
80A356525042001517 device

C:\sdk\android-sdk\tools>adb shell
$ su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image
# sync$ su
# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
# cat /sdcard/flash_image > /system/bin/flash_image
# chmod 755 /system/bin/flash_image
$ $: permission denied
$ $ $ $ su
# syncsu
$ su
su
Permission denied
$ su
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
Permission denied
$ mount: Operation not permitted

ทำยังดี ครับ

Replies from dekbacom